Newsroom Careers Investor Relations
English
× Search
New
you are currently viewing 53 results of 53 Total

ORION X

ORION X electromagnetic flowmeter with fork coupling
   
Code Fork Coupling (T)  Connection  Flow rate  Internal Passage  MAX Pressure  Pulses 
46299A90  T9 F  A-NET  60 ÷ 2500l/min  75mm  5bar  24pls/l

Delta 70t monitor

Delta 80t and Delta 70t are ARAG virtual terminals designed to be installed on any machine with ISOBUS technology. Thanks to the intuitive interface you can manage all the functions of your agricultural machine with ease.
   
Code Connection  Type 
4675200  Isobus  GPS (NAV)
4675201  Isobus  GPS (NAV) - Universal Terminal (UT)
4675202  Isobus  GPS (NAV) - Universal Terminal (UT) - Task Controller (TC-SC, TC-GEO, TC-BAS)
4675203  Isobus  Universal Terminal (UT)

Visio BLC kit

FIXED GEOMETRY BOOM LEVELING SYSTEM
   
Code
4670612

Kit Visio BLC Multi-row

Multirow Boom leveling kit - hydraulic actuators
   
Code
4670612

Kit Visio TTC

Draw bar / axle direction control kit VISIO kit for draw bar/steering axle management
   
Code
4670613

GPS speed sensor

GPS speed sensor ATLAS100 + connection cable It can be mounted as an alternative to the wheel sensor, simplifying installation and reducing the possibilities of failure. It is available in two versions that are different because of the output signal:- signal having a frequency proportional to the speed- serial port for direct connection to BRAVO 350 and BRAVO 180S computers, which receive both speed and position data in order to keep track of the job performed (GPS Tracking).
   
Code Length  Lunghezza 
46701651  5000mm  5mt

330

Line filters T6 fork coupling Line filters series 330 have been designed to be fitted on the circuits of machines with high delivery flowrate to sections. The increasing request of high volumes of product to be distributed led to the creation of a filter on the delivery line able to work at high pressure values (15 bar - 220 PSI) and featuring large inner passages. The filter with T6 fork couplings (hence with a 40 mm ND passage), thanks to the high flowrate of 500 l/min - 132 GPM and to the minimum pressure drop, allows designing circuits with ball valves of the 853 series for a perfect integration and maximum compactness and efficiency. The three operating versions present inside the filter allow keeping the self-cleaning system active, even in case of multiple circuits installed on the crop sprayers.
   
Code Fork Coupling (T)  Filtering area  Screen type 
3301162V  T6  160cm2  Inox 32 mesh

Kit Visio TTC+BLC

Draw bar / axle direction + boom leveling control kit
   
Code
4670614

IBX100 Orchard Isobus control unit

The version of the IBX100 ISOBUS Orchard control unit for orchard sprayers, allows you to have all the advantages of ISOBUS technology even on this type of machine.
   
Code Connection 
4679012  Isobus

Syncro

SYNCRO EDITOR SYNCRO EDITOR is the software forPC* (Windows®) that allows creating,modifying and sending to SYNCRO the movement sequences of the 853CAN-Bus valves.
   
Code
4670800.500 New!

Syncro

SYNCRO SYNCRO is an innovative control system to manage auxiliary services on the spraying machines. Through the CAN-Bus connection to the new electric valves of the 853 and 863 series and several sensors, it is possible to automate the control sequences (tank filling, circuit and boom washing, etc.) that up today were performed manually by the operator.These control sequences are programmed by the farming machine manufacturer through a specific software for personal computer and then transferred to the SYNCRO memory through SD card.NEW FEATURE: the Syncro function is now available on all the monitors in the cabin, both Arag and ISOBUS, through IBX100 Sprayer.
   
Code Connection 
4670800 New!  Anet
4670801 New!  Isobus

SMOOTH LINE 2 - MISTRAL

“Smooth-line 2” threaded lids with removable labyrinth breather "MISTRAL" Made to current anti-pollution standards, thelid is equipped with a double breather valve toempty the tank quickly with the lid closed, evenwith a high-delivery pump.​
   
Code Size  D  F  Pack Qty  h 
3523080 New!  22"  620mm  567mm  20  29mm

Delta 80t

Delta 80t monitor ISOBUS VIRTUAL TERMINAL
   
Code Connection  GPS - Glonass  Type 
4675300 New!  Isobus    GPS (NAV)
4675301 New!  Isobus    GPS (NAV) - Universal Terminal (UT)
4675302 New!  Isobus    GPS (NAV) - Universal Terminal (UT) - Task Controller (TC-SC, TC-GEO, TC-BAS)
4675303 New!  Isobus    Universal Terminal (UT)

Interface valves 3/2 wires

3/2 wires interface valves for Bravo 400sLT with direct connection This cabling interface allows you to adapt ARAG wiring that pilot 2-wire valves, to ARAG computers that pilot 3-wire valves.
   
Code Poles  Sections 
46700107.100 New!  23  4/5
46700107.101 New!  28  7

ORION 3

ORION 3 electro-magnetic flow meter with fork coupling Orion 3 is an electromagnetic flowmeter designed to manage liquid distribution systems on seeders.Several flowmeters can be connected via the CAN-Bus port to monitor all seeding lines.Each Orion 3 can control a valve to manage the output flowrate.
   
Code Fork Coupling (T)  Flow rate  Internal Passage  MAX Pressure  Pulses  Type 
46203E New!  T1 F  0.15 ÷ 6l/min  DN3mm  10bar  20000pls/l  PPFV
46203G New!  T1 F  0.3 ÷ 12l/min  DN4mm  10bar  10000pls/l  PPFV
462031 New!  T1 F  1 ÷ 40l/min  DN7mm  10bar  3000pls/l  PPFV
462032 New!  T1 F  2 ÷ 80l/min  DN10mm  10bar  1200pls/l  PPFV

345

High pressure line filters Particularly suitable with sprayers and atomisers
   
Code Filtering area  Flow rate  MAX Pressure  Screen type  Self-cleaning 
3450032 New!  62cm2  150l/min  50bar  Inox 32 mesh  
3450033 New!  57cm2  150l/min  50bar  Inox 50 mesh  
34500335 New!  63cm2  150l/min  50bar  Inox 80 mesh  
3450034 New!  51cm2  150l/min  50bar  Inox 100 mesh  

Flowtron CSD

Flowtron Cable Smart Driver
   
Code
4679801 New!

852

3-way electric ball valve with bottom inlet and fork couplings
   
Code @ 0,5bar - 7PSI Flow rate  Absorption @ 12 V  Fork Coupling (T)  Connection  DN  MAX Pressure  On / Off @ 90°  Ball  Power supply voltage  Ways 
852T23A3 New!  200l/min  0.5 A  T3  SWITCH ON-OFF  20 mm  15bar  0.4 s  AISI 316 BALL  12 VDC  3 lower

ORION 3 PLUS

ORION 3 PLUS electro-magnetic flow meter with fork coupling Orion 3 PLUS is an electromagnetic flowmeter designed to manage liquid distribution systems on seeders.Several flowmeters can be connected via the CAN-Bus port to monitor all seeding lines.Each Orion 3 can control a valve to manage the output flowrate.
   
Code Fork Coupling (T)  Flow rate  Internal Passage  MAX Pressure  Pulses  Type 
46204G New!  T1F  0.3 ÷ 12l/min  DN4mm  10bar  10000pls/l  PPFV

Cables for Flowtron

IBX100 - Flowtron CSD Connection Cable
   
Code
4679800.100 New!

Cables for Flowtron

Flowtron CSD Connection Cable
   
Code Lunghezza 
4679800.120 New!  1mt
4679800.121 New!  1,5mt
4679800.122 New!  2mt
4679800.123 New!  2,5mt
4679800.124 New!  3mt
4679800.125 New!  3,5mt
4679800.126 New!  9mt

Cables for Flowtron

Flowtron CSD - Flowtron FCV Connection Cable
   
Code Lunghezza 
4679800.140 New!  0,6mt
4679800.141 New!  1,3mt

Flowtron Quadri-Jet

4-way swivel nozzle holder with Flowtron FCV FLOWTRON FCV is an electric valve designed for spraying, weed control and liquid fertilizer distribution applications, including on seeders.It can be operated in pulse-width modulation (PWM), thus adjusting the nozzle flowrate. Therefore, the pressure remains constant, as does the size of the drop. Thanks to this technology, targeted distribution in terms of position and quantity is possible, adjusting the flow and flowrate of each nozzle precisely, avoiding over- and under-dosage, for economic and environmental sustainability.The technological innovation concerns the double-ring seal, which allows for low moving core travel, which means a high flowrate, minimal current draw and accurate setting adjustments.
   
Code Fork Coupling (T)  MAX Pressure  Material  Sections 
4013W01 New!  T3  8bar  Viton®  4

Flowtron Compact-Jet

Threefold hinged clamp-type crop spraying nozzle holders Compact Jet, equipped with Flowtron FCV Stainless steel screw and nut are included​FLOWTRON FCV is an electric valve designed for spraying, weed control and liquid fertilizer distribution applications, including on seeders.It can be operated in pulse-width modulation (PWM), thus adjusting the nozzle flowrate. Therefore, the pressure remains constant, as does the size of the drop. Thanks to this technology, targeted distribution in terms of position and quantity is possible, adjusting the flow and flowrate of each nozzle precisely, avoiding over- and under-dosage, for economic and environmental sustainability.The technological innovation concerns the double-ring seal, which allows for low moving core travel, which means a high flowrate, minimal current draw and accurate setting adjustments.
   
Code -D-  F  MAX Pressure  Material  Sections 
4064W241V New!  1/2"  10mm  8bar  Viton®  3
4064W261V New!  1"  10mm  8bar  Viton®  3
4064W25A1V New!  25 mm  10mm  8bar  Viton®  3

IBX100 ISOBUS Flowtron

Control unit IBX100 ISOBUS Flowtron IBX100 ISOBUS FLOWTRON is the control unit, designed and developed by ARAG, ready to manage all the functionalities of the Flowtron system. The ISOBUS compatibility allows control and monitoring of the Flowtron system status and the proper operation of the treatment on the Virtual Terminal in the tractor’s cab. With the integrated ISOBUS Task Controller, the ISOBUS FLOWTRON control unit empowers you to perform Automatic Nozzle-by-nozzle shut-off, Variable Rate Application, and job data collection, all in one versatile package.
   
Code
4679013 New!

875

Electric diaphragm pressure relief control valve with fork coupling. Valve in CAN-Bus with position sensor.
   
Code Absorption @ 12 V  Fork Coupling (T)  MAX Pressure  On / Off @ 90°  Ta  Tb  Tc  Power supply voltage 
875D652E New!  3 A  T5  20bar  13 sec.  T5 F  T5 F  T5 F  12 Vdc
875D6506E New!  3 A  T5  6bar  13 sec.  T5 F  T5 F  T5 F  12 Vdc
875D651E New!  3 A  T5  10bar  13 sec.  T5 F  T5 F  T5 F  12 Vdc

Fitting for quick connection

   
Code MAX Pressure  Tolerance  Pipe Ø 
195B6B New!  20bar  ø20mm ± 0.15mm  20 mm
195C6C New!  20bar  ø22mm ±0.15mm  22 mm
195D6D New!  15bar  ø25mm ±0.18mm  25 mm
195262 New!  20bar  ø21.3mm ±0.15mm  1/2"
195363 New!  15bar  ø26.9mm ±0.18mm  3/4"
195464 New!  10bar  ø33.7mm ±0.25mm  1"

SELE-JET

Twin quick fitting nozzle holder with "Flow Stop 2" The nozzle holder can be rotated manually to select the pair of nozzles suitable for the treatmentStainless steel screw and nut are included​FLOW STOP 2 is a pneumatically-operated valve that, applied to ARAG nozzle holders, allows the separated control of every single nozzle.*Pneumatically-operated valve, normally closed*Side 1/8” female air coupling, with adjustable position*Applicable on any anti-drip nozzle holder*Made of polypropylene reinforced with fiberglass*Seals in Viton®, spring in stainless steel*Air consumption 0.0069 l/cycle (0.0146 cfm)
   
Code -D-  F  MAX Pressure  Material  Sections  air (min) 
4063G14221 New!  20 mm  10mm  8bar  Teflon®  2  3.8bar
4063G145A2 New!  25 mm  10mm  8bar  Teflon®  2  3.8bar
4063G1462 New!  1"  10mm  8bar  Teflon®  2  3.8bar

Twin hinged clamp-type crop spraying nozzle holders, equipped with SELETRON valve

Stainless steel screw and nut are included​SELETRON is a electronic shut-off nozzle valve that, applied to ARAG nozzle holders, allows the separated control of every single nozzle. Communication via CAN-Bus, allow receiving the opening/closing commands and outputting the information about valve status.-SELETRON multiple nozzle holders (twin and fourfold ones) allow you to select the nozzle or the nozzle set.-Reduced current absorption limited to the time the electronic valve is activated.-Installing the valve next to the nozzle ensures the continuous fluid flow inside the boom.
   
Code -D-  Absorption @ 12 V  F  MAX Pressure  Material  Sections  Power supply voltage 
4063T144A0 New!  22 mm  0.32 A*  10mm  8bar  Viton®  2  12 Vdc
4063T144A2 New!  22 mm  0.32 A*  10mm  8bar  Teflon®  2  12 Vdc
4063T1440 New!  1/2"  0.32 A*  10mm  8bar  Viton®  2  12 Vdc
4063T1442 New!  1/2"  0.32 A*  10mm  8bar  Teflon®  2  12 Vdc
4063T145A0 New!  25 mm  0.32 A*  10mm  8bar  Viton®  2  12 Vdc
4063T145A2 New!  25 mm  0.32 A*  10mm  8bar  Teflon®  2  12 Vdc
4063T1450 New!  3/4"  0.32 A*  10mm  8bar  Viton®  2  12 Vdc
4063T1452 New!  3/4"  0.32 A*  10mm  8bar  Teflon®  2  12 Vdc
4063T1462 New!  1"  0.32 A*  10mm  8bar  Teflon®  2  12 Vdc

875

Electric diaphragm pressure relief control valve with fork coupling. Valve in CAN-Bus with position sensor.
   
Code Absorption @ 12 V  Fork Coupling (T)  MAX Pressure  On / Off @ 90°  Ta  Tb  Tc  Power supply voltage 
875D660E New!  3 A  T6  8bar  13 sec.  T6 F  T6 F  T6 F  12 Vdc
875D6612E New!  3 A  T6  12bar  13 sec.  T6 F  T6 F  T6 F  12 Vdc

SMOOTH LINE 2

Flat surfaces
   
Code Connection  Size  D  F  Pack Qty  h 
3512180 New!  Flat surface  22"  620mm  567mm  15  29mm

Concentrated foam

The new-formula inert foaming productimproves efficiency, lasts longer on theground and offers greater visibility evenin semi-dark conditions.
   
Code Description  Pack Qty 
5200501 New!  1.32 US gall (Jerry-can)  4

SMOOTH LINE 2

“Smooth-line 2” closed lid
   
Code Size  D  F  Pack Qty  h 
3523180 New!  22"  620mm  567mm  20  29mm

326

Line filters T6 MALE / T5 FEMALE fork coupling
   
Code Fork Coupling (T)  Filtering area  Flow rate  MAX Pressure  Screen type 
32620S3 New!  T5  106cm2  200 ÷ 280 l/min  12bar  Inox 50 mesh
32620S35 New!  T5  97cm2  200 ÷ 280 l/min  12bar  Inox 80 mesh

SMOOTH LINE 2 - MISTRAL

For flat surfaces “Smooth line 2” threaded lids with removable labyrinth breather “MISTRAL” and fixed labyrinth breather “GHIBLI”Made to current anti-pollution standards, the lid is equipped with a double breather valve to empty the tank quickly with the lid closed, even with a high-delivery pump.​
   
Code Connection  Size  D  F  Pack Qty  h 
3512080 New!  Flat surface  22"  620mm  567mm  15  29mm

326

Line filters T6 MALE / T5 FEMALE fork coupling
   
Code Fork Coupling (T)  Filtering area  Flow rate  MAX Pressure  Screen type  Self-cleaning 
32621S3 New!  T5  106cm2  200 ÷ 280 l/min  12bar  Inox 50 mesh  
32621S35 New!  T5  97cm2  200 ÷ 280 l/min  12bar  Inox 80 mesh  

SMOOTH LINE 2

Twin gasket ring for flat surfaces
   
Code Connection  Size  D  F  Pack Qty  h 
3515180 New!  twin gasket ring for flat surfaces  22"  620mm  567mm  14  29mm

SMOOTH LINE 2 - MISTRAL

Twin gasket ring for flat surfaces ​“Smooth line 2” threaded lids with removable labyrinth breather “MISTRAL” and fixed labyrinth breather “GHIBLI”.Made to current anti-pollution standards, the lid is equipped with a double breather valve to empty the tank quickly with the lid closed, even with a high-delivery pump.
   
Code Connection  Size  D  F  Pack Qty  h 
3515080 New!  twin gasket ring for flat surfaces  22"  620mm  567mm  14  29mm

SELE-JET

Twin quick fitting nozzle holder with "Flow Stop 2" The nozzle holder can be rotated manually to select the pair of nozzles suitable for the treatmentStainless steel screw and nut are included​FLOW STOP 2 is a pneumatically-operated valve that, applied to ARAG nozzle holders, allows the separated control of every single nozzle.*Pneumatically-operated valve, normally closed*Side 1/8” female air coupling, with adjustable position*Applicable on any anti-drip nozzle holder*Made of polypropylene reinforced with fiberglass*Seals in Viton®, spring in stainless steel*Air consumption 0.0069 l/cycle (0.0146 cfm)
   
Code
4063G1402 New!

853

3-way electric bolted ball valves with bottom inlet and fork couplings
   
Code @ 0,5bar - 7PSI Flow rate  A  Absorption @ 12 V  Fork Coupling (T)  B  C  Connection  D  DN  E  G  MAX Pressure  On / Off @ 180°  S  Ball  Power supply voltage  Ways  X  Y 
853T24S55 New!  270l/min  148mm  3 A  T5  42mm  171mm  SWITCH ON-OFF  98mm  32 mm  102mm  62mm  12bar  4.6 s  50mm  AISI 316 BALL  12 VDC  3 lower  33mm  38mm

Modular regulators for low volume sprayers

   
Code Fork Coupling (T)  Ø 
441335 New!  T3  Holes Ø 0.2 ÷ 2.0 mmmm

SELE-JET

2+2 nozzle rotatable quick fitting nozzle holder equipped with "Flow Stop 2" The nozzle holder can be rotated manually to select the pair of nozzles suitable for the treatmentStainless steel screw and nut are included​FLOW STOP 2 is a pneumatically-operated valve that, applied to ARAG nozzle holders, allows the separated control of every single nozzle.*Pneumatically-operated valve, normally closed*Side 1/8” female air coupling, with adjustable position*Applicable on any anti-drip nozzle holder*Made of polypropylene reinforced with fiberglass*Seals in Viton®, spring in stainless steel*Air consumption 0.0069 l/cycle (0.0146 cfm)
   
Code -D-  F  MAX Pressure  Material  Sections  air (min) 
4015G742 New!  1/2"  10mm  8bar  Teflon®  2  3.8bar
4015G7221 New!  20 mm  10mm  8bar  Teflon®  2  3.8bar
4015G75A2 New!  25 mm  10mm  8bar  Teflon®  2  3.8bar
4015G762 New!  1"  10mm  8bar  Teflon®  2  3.8bar

Modular regulators for low volume sprayers

   
Code Fork Coupling (T)  Ø 
441315 New!  T1  Holes Ø 0.2 ÷ 2.0 mmmm

SELE-JET

Fourfold quick fitting nozzle holder with "Flow Stop 2" The nozzle holder can be rotated manually to select the pair of nozzles suitable for the treatmentStainless steel screw and nut are included​FLOW STOP 2 is a pneumatically-operated valve that, applied to ARAG nozzle holders, allows the separated control of every single nozzle.*Pneumatically-operated valve, normally closed*Side 1/8” female air coupling, with adjustable position*Applicable on any anti-drip nozzle holder*Made of polypropylene reinforced with fiberglass*Seals in Viton®, spring in stainless steel*Air consumption 0.0069 l/cycle (0.0146 cfm)
   
Code -D-  F  MAX Pressure  Material  Sections  air (min) 
4063G962 New!  1"  10mm  8bar  Teflon®  4  3.8bar
4063G9221 New!  20 mm  10mm  8bar  Teflon®  4  3.8bar

Twin hinged clamp-type crop spraying nozzle holders, equipped with SELETRON valve

Stainless steel screw and nut are included​SELETRON is a electronic shut-off nozzle valve that, applied to ARAG nozzle holders, allows the separated control of every single nozzle. Communication via CAN-Bus, allow receiving the opening/closing commands and outputting the information about valve status.-SELETRON multiple nozzle holders (twin and fourfold ones) allow you to select the nozzle or the nozzle set.-Reduced current absorption limited to the time the electronic valve is activated.-Installing the valve next to the nozzle ensures the continuous fluid flow inside the boom.
   
Code Fork Coupling (T)  MAX Pressure  Weight  Sections 
4063T1400 New!  T3  8bar  230gr  2
4063T1402 New!  T3  8bar  230gr  2

Female threaded with female connection

   
Code - F -  Fork Coupling (T)  L  Material  Pack Qty  h 
239032 New!  G 1/2"  T3  37mm  PA  25  19mm

Boom-end 90° hose fitting for quick connection with fork coupling female

   
Code Fork Coupling (T)  MAX Pressure  Tolerance  Pipe Ø 
191223 New!  T3  20bar  ø21.3mm ±0.15mm  1/2"

Calibrated cap for hosetail

   
Code Pack Qty 
40291813 New!  25

Multipurpose wrench for Flowtron maintenance FCV

   
Code
TRZ0020 New!

853

3-way electric bolted ball valves with bottom inlet and fork couplings - SAE J1939 protocol The electric ball valves of the 853 series are the result of a special design focused on the functionality and reliability of an accessory that is essential both in the agricultural and in the industrial field.All valves have technical features that make them unique on the market and safe and reliable parts for any type of system.A complete range consisting of 2-way, 3-way valves available both with side and lower 4/5-way coupling. The electric valves of the 853 series feature a new completely redesigned gear motor that allows a longer duration as well as great reliability and flexibility. In addition to the new bodies and new connection sizes, the most outstanding news concerns the CAN-Bus version with SAE J1939 protocol, which makes it easy to control even very complex hydraulic circuits, such as those for the management of sprayers’ auxiliary services.
   
Code @ 0,5bar - 7PSI Flow rate  A  Absorption @ 12 V  Fork Coupling (T)  B  C  Connection  D  DN  E  G  MAX Pressure  On / Off @ 90°  S  Ball  Power supply voltage  Ways  X  Y 
853D24S55E New!  270l/min  148mm  3 A  T5  42mm  171mm  SAE J1939  98mm  32 mm  102mm  62mm  12bar  2.3 s  50mm  AISI 316 BALL  12 VDC  3 lower  33mm  38mm

Connections

Orion WR-power connection cable
   
Code Length 
462W000.102 New!  3000mm

Tee fitting with female / male connection

   
Code A  C  L  Material  Pack Qty  Ta  Tb  Y  Z 
139233 New!  29mm  25mm  63mm  PA  10  T3  T3  14mm  M6 - 1/4 UNC

3 way manifold

   
Code A  B  E  L  Material  Pack Qty  Ta  Tb  Tc  X  X1  Y  Z 
179255 New!  38mm  59mm  47mm  112mm  PA  5  T5  T5  T5  70mm  25mm  81mm  M6 - 1/4 UNC